Made to order grills, rings, Equipment for mounting speakers. Power distributor.

Alexander612

Active member
I will execute your order on an individual project.
Approximate steps for ordering:
The description of the rings and grilles,parts, etc.
1. Drawing up individual technical project together with the customer.Please make a picture of the place they going to,manual to speaker or link required. It is desirable (but rather necessary) to make the photo
Clarification of the form, the type and design of products mounting rings(spacers or protective grill: mesh insert or clamp style), polishing, painting, satin finish (Decorative risk until matt) on photo examples from the gallery of works . Selecting protective mesh (grill): small or large, or the model for the manufacture of the machine laser cutting, etc. Model making himself at your request.
Manufacturing grid laser cut (after the approval of the model made by me according to your wishes or designs. Calculation and approval of its value is carried out separately, since its value is higher than the cost of nets made of perforated fabric.
2. I make a sketch and later, together, we specify all the dimensions, namely: which screws are used for mounting,what needed holes - which are necessary threaded holes (m3, m4, etc.) - may be for example a photo.
3. After clarifying all questions overall costwill be determined. Then I run to the work of the queue - about 2 weeks.
4. Payment after manufacture and provide a photo of final work.

Sending international mail EMS to the specified address.
What is included in the final cost and a brief description of the process (for example, rings with a protective mesh)
1. The diameter and thickness of the aluminum blank Rings.
2. its manufacture.
3. The production of holes and thread at a given radius.
3. Further -finishing of the rings-satin finishing, polishing, painting.
There are many examples here by reference (but not all) :)
https://drive.google.com/drive/folders/0B3wdELGfZiHyb1pXajdHMlpBTnc?usp=sharing
 
Those of you who don't know, I can vouch for Alexander.... he is good people. I did a high dollar project with him and he delivered, and does EXCELLENT work.

Highly recommended!
 
Hi. Yes I can . But usually everyone asks for their configuration of electrical consumers.I.e. Individual distributors are made under each project.
 
If you need a distributor for your needs - then I need:
1. wire cross-section or types of crimped copper lugs.
2. The number of inputs.
3. The number of outputs.
Better just a freehand drawing, a top view. Anyway, then I'll draw everything for sure.
 
Very nice work :) Next spring I'll be in touch. Thinking 2 vertical bar grill for Alpine Type R 12 emulating these

attachment.php
 
Extreme support needed once you get above the OEM level. You know the brand or model of drivers on photo Alex?
 
That's the sexiest audio porn this side of home audio
Not certainly in that way . In home audio - the wall thickness from mdf can be set to both 70 and 100 mm, but in a car it is impossible. Therefore, aluminum support rings are the way out! They are, as it were, a continuation of the basket and allow you to reveal the possibilities of the speaker 100 percent!
That is, when an audio system is built like this, then this can be called an uncompromising installation option :). Plywood, MDF, plastic - it's all mediocre :)
 
Salad-colored aluminum mounting rings - chemically oxidized. This allows them to be glued into an epoxy resin (or putty, etc.).
 
Back
Top